PV10PX Commercial-Grade Overhead 2-Post Lift
When your shop handles everything from sedans to full-size trucks, you need a lift that
doesn’t force you to choose between capacity and versatility. An undersized lift limits the
vehicles you can take on. An oversized one wastes floor space and budget on capacity you
rarely use.
The Atlas PV10PX gives you 10,000 lbs of lifting capacity with both
asymmetric and symmetric arm configurations, adjustable column height, and direct-drive
cylinders — all in a commercial-grade overhead 2-post design built for daily shop use.
Features
| ✓ | 10,000 lb Lifting Capacity — handles full-size trucks, SUVs, and commercial vehicles. |
| ✓ | Asymmetric & Symmetric Arm Positions — switch configurations to fit different vehicle types and lift point layouts. |
| ✓ | Adjustable Column Height — set to 143 1/8″ or 147″ to match your ceiling clearance. |
| ✓ | Direct-Drive Cylinders — no chains to maintain, smoother operation, and fewer wear points. |
| ✓ | Automatic Arm Restraints — arms lock into position for consistent, safe placement every time. |
| ✓ | Single-Point Lock Release — lower the lift from one location instead of releasing each arm individually. |
| ✓ | Padded Carriages & Shut-Off Bar — protect vehicle underbodies and prevent over-travel. |
| ✓ | Powder Coat Finish — resists chips, corrosion, and shop chemicals for long-term durability. |
Asymmetric & Symmetric Arms for Maximum Vehicle Coverage
Most 2-post lifts lock you into one arm configuration. The PV10PX lets you run both
asymmetric and symmetric positions, so you can optimize arm placement for everything from
compact cars to long-wheelbase trucks.
Asymmetric positioning rotates the vehicle slightly so the driver’s door clears the column —
giving you better access without repositioning. Symmetric mode centers the vehicle for
balanced lifting on heavier loads. Having both options means one lift handles your entire
workload.
Direct-Drive Cylinders — No Chains to Maintain
Chain-drive systems work, but they add maintenance and wear points. The PV10PX uses
direct-drive cylinders that connect hydraulic power straight to the carriages. Fewer moving
parts means smoother lifting, less maintenance, and longer service life. Combined with the
7 1/2″ x 14 1/2″ column footprint and 17 1/2″ x 20 1/2″ base, the lift delivers stable, even
lifting through the full range of travel.
Made For
Built for shops running a mixed workload of cars, trucks, and SUVs that need a reliable 10,000 lb lift:
- Independent auto repair shops
- Dealership service departments
- Fleet maintenance facilities
- Body shops and collision centers
- Serious home garages and hobby builders
What’s Included
| Atlas PV10PX 10,000 lb Overhead 2-Post Lift | 1 |
| 12-Piece Truck Adapter Set | 1 |
| Mounting Hardware | Included |
The included 12-piece truck adapter set and mounting hardware mean you’re ready to install and start lifting on day one — no extra purchases needed.
Technical Specifications
| Capacity | 10,000 lbs |
| Overall Height | 143 1/8″ (11′ 11 1/8″) or 147″ (12′ 3″) |
| Overall Width w/ Motor | 145″ (12′ 1″) |
| Outside Column to Outside Column | 125 1/2″ (10′ 5 1/2″) |
| Max Lift Height (Without Adapters) | 72 1/2″ |
| Max Lift Height (With Adapters) | 81 1/4″ |
| Minimum Arm Height | 4 1/2″ |
| Inside Column | 110 1/8″ (9′ 2 1/8″) |
| Drive Thru (Symmetric) | 96 1/4″ (8′ 1/4″) |
| Drive Thru (Asymmetric) | 90 1/4″ (7′ 6 1/4″) |
| Column Size | 7 1/2″ x 14 1/2″ |
| Base of Lift | 17 1/2″ x 20 1/2″ |
| Motor / Electrical | 220V single phase, 30 amp breaker recommended |
| Oil Requirement | 3–5 gallons AW32/AW46 (not included) |
| Shipping Weight | 1,875 lbs |
Reviews
There are no reviews yet.