TMG INDUSTRIAL
6,000 lb Portable Single Post Auto Lift
Model TMG-ALSP60 | 72″ Max Lifting Height | Mobile Pallet-Jack Style
Not every shop has room — or budget — for a permanent 2-post lift. The TMG-ALSP60 gives you
6,000 lbs of lifting capacity in a mobile, pallet-jack-style design that
rolls into position, lifts one corner or side of the vehicle, and rolls away for storage
when you’re done. It’s a practical way to add real lifting capability to garages, mobile
repair setups, and shops without in-ground or overhead lift infrastructure.
Features
| ✓ | Mobile Pallet-Jack Style Design — low profile auto lift that rolls into place and tucks away when not in use. |
| ✓ | Heavy-Duty Structural Column — 10.5″ x 12.5″ column built to handle daily commercial use. |
| ✓ | Chain-Drive Carriage Sliders — smooth, controlled movement along the column for consistent lifting. |
| ✓ | Retractable Reach Arms — extend to reach the vehicle’s lift points, with height screw-up pads for fine adjustment. |
| ✓ | Mechanical Single-Point Self-Lock — secures the lift at height without relying on hydraulic pressure alone. |
| ✓ | 8 Height Adapters Included — ready to match a range of vehicle lift-point heights out of the box. |
| ✓ | CETL Certified Hydraulic Pump — 120VAC, 3HP motor built and certified to recognized safety standards. |
What’s Included
| TMG-ALSP60 6,000 lb Portable Single Post Auto Lift | 1 |
| Height Adapters | 8 |
Specifications
| Model | TMG-ALSP60 |
| Lift Capacity | 6,000 lb |
| Overall Assembled Dimensions (L x W x H) | 112″ x 94″ x 103″ |
| Max Lifting Height (No Pads) | 72″ |
| Max Height Clearance | 67″ |
| Min Height on Ground (No Pads) | 5″ |
| Distance (Front to Rear Lift Pads) | 28.75″ – 83.75″ |
| Distance (Two Rear Lift Pads) | 53″ – 72″ |
| Distance (Two Front Lift Pads) | 55″ – 91.5″ |
| Shipping Dimensions | 110″ x 42″ x 43″ |
| Shipping Weight | 2,400 lb |
| Condition | New |
| Manufacturer Warranty | 1 Month |
Hydraulic Motor Pump
| Power | 120VAC, 3HP |
| No-Load Speed | 3,420 RPM |
| Max Working Pressure | 2,650 PSI |
| Tank Capacity | 11 L |
| Certification | CETL Certified |
Note: This lift runs on standard 120VAC power — no special electrical setup required. Its mobile, low-profile design makes it a practical option for shops and garages without space for a fixed 2-post or 4-post lift.
Reviews
There are no reviews yet.